EN | CN

Single soldier flying stick drone

key word：

Category：

Enquiry

Related Products

Product Description

1. Product introduction

The orderly functioning of the world is inseparable from the hard work of frontline soldiers. The cold winter is harsh and arduous. For this reason, we bring the Individual Flying Stick quadcopter drone. The Individual Flying Stick is a unique and innovative device that breaks the Traditional layout brings comprehensive innovation.

1. Easy to operate, easy to store, and can be equipped with a variety of optical cameras.

2. Single/two-person operations are tiny targets that are difficult for air defense systems to protect against.

3. Carry out flexible reconnaissance operations in cities, mountains, jungles, deserts, and other geographical environments.

4. Continue to upgrade the bee swarm formation.

2. Product features

① It can be carried by two persons/single soldiers, the arms and propellers can be folded, and the cylinder can be stored.

② The 82-2/M18 can be directly mounted for flight missions.

③ One click to unlock, one click to lock, quick attack.

④ Stable flight radius of 2km, with autonomous return function;

⑤ Have low-altitude and high-speed maneuverable penetration capabilities;

3. Product parameters

Aircraft platform parameters

(1) Platform architecture

The individual flying stick UAV platform system consists of the airframe, power system, communication link, operating system, positioning and navigation, and display system.

(2) Platform layout: Single-soldier flying stick drone, X-shaped layout, center of gravity is lower.

(3) Three-body link: Using the three-body link ground station, it is easy to carry.

(4) Performance parameters

Maximum level flight speed: 120 km/h;

Maximum flight time: minutes (with payload);

Maximum hover time: minutes (with load);

Maximum battery life without load: 30 minutes;

Maximum endurance: 5km;

Maximum take-off altitude: 5000m (altitude);

Maximum landing altitude: 5000m (altitude);

Practical ceiling: 5500m (altitude);

(5) Weight * size parameters

Maximum take-off weight: Kg;

Wheelbase size: 720 mm;

Dimensions after folding: 301x85x63mm (mounted); 214x85x63mm (unloaded)

Single machine weight: 1.3Kg

Warhead weight: 0.26Kg;

(6) Flight performance

Minimum turning radius: 3m

Maximum climb rate: 15m/s

Maximum descent rate: 10m/s

Maximum horizontal flight acceleration 0-100Km/h: 3s

Maximum hover time: 10 minutes

Maximum wind resistance level: Level 7 wind

(7) Structural strength and stiffness

The maximum normal overload is greater than 2.0.

(8) Power parameters

The onboard power supply continues to discharge for more than 5 minutes (flying at a speed of 15m/s);

(9) Flight control parameters

1.STM32H743 series processor, 480MHZ operating frequency, 1MB SRAM. 2.2MB Flash program storage, 32KB FRAM parameter storage.

3. Built-in two sets of IMU sensors to achieve fault redundancy switching.

4. With IMU temperature compensation function, it can easily cope with harsh temperature environments.

5. Onboard RGB LED light is used to prompt flight control status information. 6. Built-in magnetometer sensor can measure the magnetic heading of the drone.

7. Built-in barometer sensor, which can measure the air pressure altitude of the drone; communication data link parameters.

(10) Three-body data link parameters

Remote control battery life: 13 hours.

HDMI: can be connected to the large screen of the combat command center. Processor: Qualcomm eight-core CPU chip.

Display: 5.5-inch 1080P display with 60-frame video stream back. 1000 nits high brightness display.

Combat range: Standard omnidirectional antenna, real-time image data transmission and control distance up to 8KM.

Soldier relay: Point A is Soldier 1. Point B is the center circle of the combat zone. Point C is Soldier 2, which increases the combat range.

(11) Three-proof ultra-wide-angle reconnaissance camera parameters

Output signal: Ethernet.

Camera viewing angle: 160° horizontally.

Night vision function: 1080P full HD starlight night vision FPV.

Rotation range: Controllable pitch rotation range -90°~25°. Image sensor: 1/2.7-inch CMOS, 2 million effective pixels.

Task load parameters

(1) Overall indicators

The mission load part is equipped with a 200-260g warhead. It must be stable and reliable during flight and use. There must be no looseness or detachment. The detonation mechanical structure and servo device must be stable and reliable, and can trigger the warhead fuze in time. The warhead can be designed in three stages. The first step is to achieve compatibility with the 82-2 type grenade currently installed by the troops; the second step is to realize the non-lethal warhead of the current field installation type; the third step is to realize a specially-made modular warhead; As shown in Figures 1 and 2 below:

Figure 1 Special warhead Figure 2 Type 82-2 grenade

① Type 82-2 grenade parameters:

Basic data: The killing radius is greater than 6m, and the average throwing distance is about 40m. The main charge is 40g of high explosive. This bullet is equipped with a safety pin pull ring fixing device to ensure the safety of the grenade in various environments. The Type 82-2 all-plastic handleless steel ball grenade has a total bullet mass of 260g, a bullet diameter of 52mm, a full bullet length of 90mm, and a killing radius of 6m.

4. Overall layout

(1) Overall appearance of the combat version