4-inch drone

key word:

Category:

Product Description

I. Product Introduction

Body: 350 g (excluding battery)

Rack material: Carbon fiber

Payload: 100G

18-minute endurance

Flight Control: F722

Electric speed controller: 65A

Motor: 2004KV

Propeller: Three blades

Communication channel: 915 MHz

Camera: AI-Powered Thermal Imaging with Motion Tracking

Remote control: RuiSiKai X10e

VR glasses: 4.0 VR glasses

Body size: 240*240*80mm

 

II. Drone Assembly Diagram

 

III. Folded Diagram of the FPV Drone

 

4. The remote control comes with a high-frequency head.

 

V. VR Glasses

6. Camera

Supports detection target recognition types: People and vehicles by default.

Supported target detection ranges: Vehicle: 450m; Person: 170m

Minimum tracking pixel size of the target object: 16×16 pixels

Maximum tracking speed for dynamic targets: 60 km/h

Intelligent adsorption tracking: Supports fuzzy locking with a crosshair, enabling close-range crosshair snapping.

Trajectory Prediction and Memory Tracking: Supports a dual-mechanism tracking approach featuring both trajectory prediction and feature memory.

Maximum supported number of target recognitions: 50 targets

Support for Picture-in-Picture: Supported

Main control computing power (TOPS): 1

Control protocol: CRSF

Supported firmware: BetaFlight/ArduPilot

Input voltage (V): 9~16

Dimensions (length, width, height, mm): 38*38*27.7

Mounting hole dimensions: 25.5 × 25.5

Sensor (Inch): 1/2.8

Focal length (mm): 4

FOV: 69° (H) × 42° (V)

Low illumination: 7341 mV/lux·s

Video input format: 1920*1080@30Hz

Camera dimensions (length, width, height in mm): 19*19*30

Pixel pitch: 12 µm

Focal length (mm): 9.1

FOV: 20.3 (H) x 15.2 (V)

Response band: 8–14 μm (LWIR)

Video input format: 384×288@25Hz

Camera dimensions (length × width × height, mm): 26 × 26 × 42.63

Interface: USB

Recommended Products

Message to us